[Sunbeam Talbot Email List] Seat Belts

[wes.stewart at sunbeamsaloon.com]

  Right, ALPINE....oops, I keep forgetting.
I have a saloon. All I said applies there.
Yes, that installation looks great on the Alpine.

WES

On 7/19/2010 10:39 AM, Ben Feng wrote:
> All,
> M Spurrell just had retractable belts fitted to my Alpine.
> The layout was inspired by a setup I saw at last years AGM.
>
> You have to disconnect one belt end to raise/lower the hood, but it's quite easy with the coupler supplied.
>
> Not cheap, but my wife's health&  well being is priceless.
>
> I'm extremely happy with the result. Pics can be found on www.quickfitsbs.com  in the gallery.
>
> Contact me or Martin  for details on the parts required.
>
> John
>
> On Mon Jul 19th, 2010 10:58 AM EDT wes.stewart at sunbeamsaloon.com wrote:
>
>> I chose to not fit the inertia reels: opting for some aircraft style belts with . But if I were to install them, I would fit them with the big lump at the bottom for aesthetic reasons.  Not only that, the closeness of the B post to the driver seat is such that you would probably bang your head on a top reel. (presuming a 3 point harness)
>> Using hardware as pictured here http://www.djsafety.com/SeatbeltHardware.html you can easily remove the whole seat belt (leaving only the eyebolt) for shows, cleaning etc.
>>
>> WES
>>
>> On 7/19/2010 9:35 AM, Bill M wrote:
>>> Has anyone fitted or already has installed Inertia Reel seat
>>> belts in their Alpine, if so where are they fitted so that they
>>> work with the top up or down ?
>>>
>>> thanks
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Staowners mailing list
>>> Staowners at sunbeamtalbot.info
>>> http://sunbeamtalbot.info/mailman/listinfo/staowners_sunbeamtalbot.info
>>>
>> _______________________________________________
>> Staowners mailing list
>> Staowners at sunbeamtalbot.info
>> http://sunbeamtalbot.info/mailman/listinfo/staowners_sunbeamtalbot.info
>
>
>
>