[Sunbeam Talbot Email List] Seat Belts

[Ben Feng]

All,
M Spurrell just had retractable belts fitted to my Alpine. 
The layout was inspired by a setup I saw at last years AGM.

You have to disconnect one belt end to raise/lower the hood, but it's quite easy with the coupler supplied. 

Not cheap, but my wife's health & well being is priceless.

I'm extremely happy with the result. Pics can be found on www.quickfitsbs.com  in the gallery.

Contact me or Martin  for details on the parts required. 

John

On Mon Jul 19th, 2010 10:58 AM EDT wes.stewart at sunbeamsaloon.com wrote:

> I chose to not fit the inertia reels: opting for some aircraft style belts with . But if I were to install them, I would fit them with the big lump at the bottom for aesthetic reasons.  Not only that, the closeness of the B post to the driver seat is such that you would probably bang your head on a top reel. (presuming a 3 point harness)
>Using hardware as pictured here http://www.djsafety.com/SeatbeltHardware.html you can easily remove the whole seat belt (leaving only the eyebolt) for shows, cleaning etc.
>
>WES
>
>On 7/19/2010 9:35 AM, Bill M wrote:
>> Has anyone fitted or already has installed Inertia Reel seat
>> belts in their Alpine, if so where are they fitted so that they
>> work with the top up or down ?
>> 
>> thanks
>> 
>> 
>> 
>> 
>> _______________________________________________
>> Staowners mailing list
>> Staowners at sunbeamtalbot.info
>> http://sunbeamtalbot.info/mailman/listinfo/staowners_sunbeamtalbot.info
>> 
>
>_______________________________________________
>Staowners mailing list
>Staowners at sunbeamtalbot.info
>http://sunbeamtalbot.info/mailman/listinfo/staowners_sunbeamtalbot.info